TPE3 100-180 S-A-F-A-BQQE-IWB
A close-coupled single-stage volute pump with coaxial suction and discharge ports of the same diameter. The water pump has an upper pull-out design. For example, the power head (motor, pump head and impeller) can be disassembled for maintenance while the pump casing remains connected to the pipeline. The shaft seal complies with the DIN EN 12756 standard. The connection of the pipeline is achieved through PN 16 DIN flanges (in accordance with the EN 1092-2 and ISO 7005-2 standards). An air-cooled permanent magnet synchronous motor is installed on the water pump. According to the IEC 60034-30-2 standard, the energy efficiency of this motor is at the IE5 level. A frequency converter and a PI controller are included in the terminal box of the motor. This enables the system to continuously adjust the rotational speed of the motor, allowing the water pump to be adjusted to the optimal operating state according to the environmental conditions. A combined temperature and differential pressure sensor is installed on the water pump.
| Single-stage Pipeline Pump
TPE3 100-180 S-A-F-A-BQQE-IWB
Item number 93148709
Applications
Commercial Heating
Commercial Air Conditioning
District Heating
District Cooling
Heating
Refrigeration
Desalination
Drinking Water Treatment
Municipal Water Transmission and Distribution
Irrigation
Water Supply for Residential Communities and Buildings
Shut-off
Single-stage Pipeline Pump equipped with MGE motor |  |
Controller:
Frequency converter: Built-in
Liquid:
Conveyed liquid: Water
Liquid temperature range: -25.. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technology:
Pump speed on which the pump data is based: 3890 revolutions per minute
Rated flow rate: 50.8 m³/h
Rated head: 12.6 meters
Actual impeller diameter: 90 mm
Main shaft seal: BQQE
Shaft seal code: BQQE
Curve tolerance: ISO9906:2012 3B2
Materials:
Pump casing: Cast iron
Pump housing: EN-GJL-250
Pump casing: ASTM class 35
Impeller: Composite
PES+30% GF
Installation:
Ambient temperature range: -20.. 50 °C
Maximum operating pressure: 16 bar
Maximum pressure at the specified temperature: 16 bar / 120 °C
Pipe connection standard: EN 1092-2
Interface type: DIN
Connection size: DN 100
Pressure rating for pipe connection: PN 16
Length between ports: 450 mm
Flange size for motor: 56C
Electrical data:
Motor model: 90LD
Rated power--P2: 2.2 kW
Power supply frequency: 50 Hz
Rated voltage: 3 x 380-500 V
Rated current: 4.15-3.4 A
Cos phi--Power factor: 0.93-0.87
Rated speed: 360-4000 revolutions per minute
IE efficiency class: IE5
Motor full load efficiency: 90.1 %
Number of motor poles: 0
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor item number: 93113884
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 42.8 kg
Gross weight: 51.6 kg
Transport volume: 0.164 m³
Product Tags:
|
|
Grundfos TPE3 100-180 Single Stage Pipeline Pump For heating air-conditioning Seawater Desalination Drinking Water Treatment Municipal Water Supply Images
|
